Covers for lagoons and fishponds

Lagoon and fish pond covers are a waterproof synthetic covering for insulating large areas of land, excavations and open pools. They are made to size according to the specific site and are laid on the bottom and slopes so as to form a continuous protective surface between the soil and the contents of the facility.

This solution is suitable for both the construction of artificial reservoirs and for agricultural, industrial and environmental applications where it is necessary to limit the penetration of liquids into the soil or the entry of groundwater into the facility.

Applications

Coatings can be used for:

• construction of fishponds and artificial reservoirs ;

• isolation of sedimentation and technological lagoons ;

• lining lagoons in cow and pig farms ;

• creation of isolated areas for storage of liquid organic waste ;

• isolation of contaminated substances and waste from the earth's surface ;

• applications in landfills and technological sites ;

• strengthening and waterproofing of dikes and earthworks ;

• other sites where a reliable watertight barrier is required over a large area.

Waterproof synthetic lining

The coating is made of synthetic vinyl material, which forms a waterproof layer on the prepared ground base.

For large projects, the individual parts of the material are joined together to form a complete lining of the bottom and walls of the facility. The shape and dimensions are determined individually according to the geometry of the specific excavation or basin.

The material follows the relief of the base and allows the covering of both large horizontal areas and inclined slopes.

UV stabilized material

The vinyl used is UV stabilized , which is especially important for facilities exposed to sunlight for extended periods of time.

UV protection slows down the aging of the material due to ultraviolet radiation and contributes to preserving its performance characteristics in outdoor conditions.

Production for large areas

We have experience in the production and installation of coatings for significant land areas.

Each object is individual and may have different:

• length and width;

• depth;

• slope of the slopes;

• pool shape;

• technological openings;

• inlet and outlet pipes;

• drainage or control points.

Therefore, the coating is designed according to the actual geometry of the terrain and the purpose of the facility.

Covering the bottom and slopes

To ensure complete insulation, the material passes continuously through the bottom and walls of the trench.

The necessary reserve of material is provided at the periphery for proper shaping and fixing to the terrain. This reduces the risk of displacement and allows the coating to follow the shape of the ground base.

The folds that can form in large areas and complex geometry are a natural result of the material adapting to the shape of the facility.

Drainage and control system

If necessary, a drainage system can be built under the coating.

It can be used to remove moisture or to control the permeability of the facility. This allows monitoring the condition of the insulation layer and timely identification of any potential problems.

The specific solution is determined according to the purpose of the lagoon, the characteristics of the terrain and the requirements for the site.

For livestock farms

The coatings are suitable for the construction of isolated lagoons and sedimentation facilities in livestock facilities.

They can be used as part of solutions for:

• storage of liquid organic waste;

• separation of the lagoon contents from the soil;

• limiting infiltration;

• protection of soils and groundwater.

For sites to which regulatory requirements apply, the specific construction and implementation must be in accordance with the design and applicable regulatory documents.

For fishponds and ponds

When building fishponds, the coating creates a waterproof layer between the water and the ground.

This is especially useful in soils with high water permeability, where without insulation there would be significant water loss through seepage.

The system allows the construction of reservoirs on terrain where the natural characteristics of the soil do not provide sufficient water retention.

Main advantages

• Watertightness – forms a protective barrier between the soil and the contents of the facility.

• Custom-made – the cover is designed according to the specific terrain and geometry of the pool.

• Suitable for large areas - possibility of implementing large-scale lagoons, fishponds and technological sites.

• UV stabilized material – designed for long-term outdoor use.

• Covering complex shapes – the material can follow the bottom, slopes and various geometries of the excavation.

• Possibility of drainage under the coating - to control and remove moisture.

• A wide range of applications – agricultural, industrial, environmental and hydrotechnical sites.

Individual solution for each site

There is no universal standard size for lagoon and fish pond covers. Each project is considered individually.

To determine the appropriate solution, the following are important:

• the dimensions of the facility;

• the depth;

• the slope of the walls;

• the shape of the bottom;

• the purpose of the lagoon;

• the presence of pipes, shafts and other technological elements;

• the method of fixation along the periphery;

• the need for a drainage or control system.

Based on this information, the required amount of material, the construction details and the method of implementation are determined.

Lagoon and fish pond covers are a practical solution for creating large watertight surfaces where a reliable synthetic insulating layer is needed between the ground surface and water, waste liquids or other materials.